Round Resin Cheeseboard Kit

A round timber board, the sea down one side.

$119

1The piece

6 coasters$89

Rectangle board$109

Round board$119

2Two coasters too?

from the resin left in the cups

Just the board$119

And two coasters$139 · +$20

$119

or 4 payments of $29.75 with Afterpay

✓ Everything but the heat gun
✓ Guide included
✓ Secure checkout

Makes: 1 board, 38 × 30 cm
Ships: Within 3 business days
Level: Relaxed
Made by: 1–2 people

Good to know. Wear the gloves in the box the whole time. Pregnant, or sensitive to smells? Wear a mask as well.

Mix the resin and the hardener until it runs clear, split it into cups of colour and pour it straight onto the timber: deepest colour first, a line of white along the edge for the waves. Then leave it flat for 24 hours to set hard and glossy.

In the box

01Round timber cheeseboard, 38 × 30 cm
02Two-part epoxy resin: the resin and its hardener
03Resin pigments
04Mixing cups and stir sticks
05Nitrile gloves
06Step-by-step guide

You'll need from home

·A heat gun (or a hair dryer), for the white of the waves

How it goes.

Mix
Resin and hardener in the cup, as the guide measures them for your piece. Stir slowly, scraping the sides, until it runs clear.
Pour & swirl
Split it into cups and stir in the pigments. Pour onto the timber, deepest colour first, a line of white along the edge, then blow the white out with your heat gun (or a hair dryer) for the waves.
24 hours
Leave it flat, somewhere warm (about 25°C) and free of dust, and don't touch it. A day later it's set hard, glossy and ready to use.

Not sure yet? Try it here first.

Station 03 · Resin

The resin
class.

Like an evening at the studio, at your table: choose your timber, find your palette, mix, pour, heat, and leave it 24 hours. Then make the real one with the kit.